Fiber Laser Protection Lens 光纤激光切割 保护镜

Laser ceramic ring consists of ceramic body, stainless steel parts and copper needles. The ceramic body is mainly used to maintain full contact with the nozzle, thereby transmitting electrical signals to the copper needle, which in turn transmits the electrical signal to the transmission line, and then the internal line of the laser head transmits the signal to the controller. After using the old laser ceramic rings on the market for a period of time, the contact between the stainless steel parts and the copper needles is poor, and the copper needles may even break, resulting in unstable or even no signal.激光陶瓷环由陶瓷体、不锈钢件和铜针组成。 陶瓷体主要用于与喷嘴保持充分接触，从而将电信号传输到铜针，铜针再将电信号传输到传输线，然后激光头的内部线将信号传输到控制器。 市场上的旧款激光陶瓷环经一段时间使用后，不锈钢部件与铜针之间的接触不良，甚至铜针断裂，导致信号不稳定甚至无信号。

Fiber Laser Ceramic Rings 光纤激光陶瓷环

The nozzle is an important part of the laser cutting machine. During the laser cutting process, the nozzle is responsible for maintaining the distance between the laser head and the workpiece, guiding the auxiliary gas smoothly through the workpiece being cut, and forming high pressure at the nozzle outlet to speed up the cutting speed and carry away the workpiece. Slag protects the internal lens of the laser head. The choice of nozzle directly determines the quality of laser cutting.喷嘴是激光切割机比较重要的一个部件,在激光切割过程中,喷嘴负责保持激光头与工件的距离,引导辅助气体顺利通过被切割的工件,并在喷嘴出口形成高压,加快切割速度,带走熔渣,保护激光头内部镜片。喷嘴的选择直接决定了激光切割的质量。

Fiber Lasers Cut Machine can cut through thin materials at very high speeds. They also have the ability to cut reflective materials without risk of reflections causing damage to the machine, which allows metals such as copper, brass and aluminum to be cut without issue. 
激光切割机是将从<a href="https://baike.baidu.com/item/%E6%BF%80%E5%85%89%E5%99%A8/2374206" target="_blank">激光器</a>发射出的激光，经光路系统，聚焦成高<a href="https://baike.baidu.com/item/%E5%8A%9F%E7%8E%87%E5%AF%86%E5%BA%A6/1595397" target="_blank">功率密度</a>的激光束。激光束照射到<a href="https://baike.baidu.com/item/%E5%B7%A5%E4%BB%B6" target="_blank">工件</a>表面，使工件达到熔点或沸点，同时与光束同轴的高压气体将熔化或<a href="https://baike.baidu.com/item/%E6%B0%94%E5%8C%96/4361815" target="_blank">气化</a>金属吹走。
随着光束与工件相对位置的移动，最终使材料形成切缝，从而达到切割的目的。

Fiber Laser Spare Parts (光纤 镭射 切割机 零件 与 配件)

หน้าแรก

เกี่ยวกับ

การแสดง

ข้อมูลติดต่อ

Fiber Laser Protection Lens 光纤激光切割保护镜

Fiber Laser Protection Lens 光纤激光切割 保护镜

Fiber Laser Protection Lens 光纤激光切割保护镜